Replacement parts for JoeBlow Pro and JoeBlow Booster.
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Upgrade any pump to the TwinHead pump head.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
This durable frame pump with SwitchHitter head automatically adjusts for Schrader or Presta valve tubes and shows pressure on a rotatable gauge. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Gauge body rotates for easy viewing. - Durable plastic barrel with aluminum shaft to reduce flex and improve efficiency. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc
Designed for Fat and Semi Fat tire bikes, the Big Bore packs massive volume per stroke and a unique head that still works with winter gloves on - Oversized press-on Schrader and Presta head won't accidentally remove valve cores and can be easily used with thick gloves. - Flexible hose attachment allows for aggressive pumping without fear of damaging valve stems. - Inverted barrel design allows for high volume in a compact size. - Coarse machined aluminum barrel for extra grip. - Water bottle boss mount with elastomer band included. - Max pressure: 50psi (3.5bar) - Volume per stroke: 90cc
Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.
Tune your suspension to perfection wherever you are with Specialized's Air Tool Shock Pump. It's easy to get exact pressures with the dial gauge and the micro air bleed button. Plus, the compact design means it will easily fit in your hydration pack.
Everybody needs a floor pump in their home, but not just any floor pump will do. You need something that's dependable, versatile, and accurate, like our new Air Tool Comp. It checks all the boxes with a dual-stage pressure gauge that delivers the low-pressure accuracy that your mountain bike tires require, while also matching the high-pressure needs of your road and gravel tires. At 365cc-per-stroke, it might not match the MTB floor pump, but this one fills big tires fast and makes for a great all-arounder that’ll get you out the door and riding—fast. - Dual-scale 3" (76mm) oversized gauge. - Steel base and aluminum barrel construction. - Ergonomic wing handle is now overmolded for comfort. - Auto-selecting SwitchHitter II head technology. - Includes spare rubber seal for head. - Max pressure: 120 PSI (8.3bar) - Volume-per-stroke: 365cc
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!
Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.
Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.
The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)
Lezyne's lightweight, powerful HV Drive mini-pump quickly inflates your mountain bike tires so you can get back to pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
Lezyne's Alloy Drive mini-pump quickly inflates your tires so you can get back on your bike. Its CNC-machined aluminum barrel and handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta and Schrader compatible Air Bleed System Flex Hose that stows inside the handle when not in use.
Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.
Page 1 of 2 Next page