Car Racks

- Rigid 6061-aluminum body with 9mm skewer

Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

Expand the carrying capacity of your GuideRail from a 2 bike set up to a 3 bike setup. Not Compatible with the AfterParty or 1.25" GuideRail - Compatible with GuideRail 2" Expandable to 3 bikes up to 45 lbs per tray, with Add-On (2" Only.) - Lowers max weight capacity from 60 lbs per tray to 45 lbs per tray - Bike can be loaded asymmetrically to eliminate handlebar interference - No contact with frame or fork, secures bicycle by contact with tires only - Carries 19mm road tires up to 3.0" wide mountain bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 55" - Not for use with fender equipped bicycle - Rack weight 18lbs (Shipping weight 23lbs) - Includes another chain to allow you to lock all three bikes.

The BackStage is the only swing away platform hitch rack on the market that swings out 180 degrees. No matter if you have a truck, SUV or camper van, this rack is perfect for those who need open access to the back end of their vehicle. Based around the MonoRail platform, the BackStage provides full access to the back of the vehicle, even with bikes loaded. - The industry’s first 180 degree swing away platform hitch rack - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Includes locking hitch bolt and cable lock, keyed alike - Not for use with fender equipped bicycles - Rack weight 59 lbs (shipping weight 75 lbs) - For cargo vans like Sprinter, Transit and ProMaster, an 8" Hitch Extension is usually required for handlebars to clear the door. Road/Gravel is usually OK, modern mountain bike bars are too wide and can contact the rear door and the hitch extension is required.

Introducing the GigaWatt, our advanced two-bike hitch rack designed for electric bicycles weighing up to 80 pounds each (RV and 5th Wheel limitations, see below). Unlike other ebike racks, the GigaWatt addresses common issues, offering frame protection, fender compatibility, robust locking, and a generous bike spacing. Enjoy effortless bike loading and peace of mind on the road with the GigaWatt. - Developed for electric bikes, works for standard bikes as well - 2 Bike Hitch Rack for 2" Hitches - Aluminum ramp included for effortless loading - Fender Compatible - Contacts the front tire only, no frame contact - Aluminum wheel trays accommodate wheelbases from 34" to 55" - Wheel sizes 20" to 29" and up to 4.5" wide - 3 axis anti-wobble hitch bolt is rock solid in the hitch - 8mm square link security chain included provides better security than cables - Same key locks bikes to rack, rack to car - Fold flat against the car and down 30 degrees for hatch access - Locks included, keyed alike, locks rack to car and bikes to rack - 15" spacing between bikes allows plenty of clearance and no interference when using a ramp - Pull handle for folding is easily accessible to stow and use rack - Rack Weight 64lbs - RV Rated and 5th Wheel (no travel trailers) with reduced weight ratings

The AfterParty is our second generation swing away platform hitch rack. While updating and applying the base from the BackStage with the innovative platform from the GuideRail, the afterparty is the ideal rack for Vans, Trucks, or SUVs where access to the rear end of the vehicle is needed. By utilizing dual load arms, the rack completely eliminates frame or fork contact, it allows for asymmetric bike loading to avoid handlebar interference, and it creates a simple aesthetic that virtually blends in with most vehicles. Carrying bikes up to 60lbs per tray, tires up to 3" wide, and wheelbases up to 55" the AfterParty can handle just about anything including most E-bikes. Included is a 10mm square link chain to secure your bikes without stress. - Can swing out a full 180* from the rear of the vehicle to allow for complete access to the back end - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not expandable, or compatible with the GuideRail Add-On - Bike can be loaded asymmetrically to eliminate handlebar interference - No contact with frame or fork, secures bicycle by contact with tires only - Carries 19mm road tires up to 3.0" wide mountain bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 55" - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Included 10mm square link chain provides best-in-class security - Not for use with fender-equipped bicycles (You can use a foam pad, but we cannot be responsible for damaged fenders) - Rack weight 60 lbs (shipping weight 83 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration. PRODUCT DETAILS - Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space - Securely supports most road, mountain, kids, and cruiser bikes by the handlebar - Fully padded cradles protect your handlebars, including carbon bars - Rotating rear wheel cup fits a wide range of wheelbases up to 50" - Accommodates bikes up to 37.5 lbs. each - Holds 20"-29" tires up to 5" wide - Add your own bike lock to the integrated lock loop for greater bike security - Foot-operated tilt mechanism makes it easy to access the rear of the vehicle. - Dual cradle retention stabilizes and protects bikes from one another. - HitchLock included - Built-in bottle opener—cheers! - Fits 2" hitch receivers only - Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only) - Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter - Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly) PRODUCT SPECS - Weight: 73.00 lbs.