Tires/Tubes

When you're out on a ride the last thing you want is to be limited by your tires in any way. Surly's ExtraTerrestrial tires were designed to let you ride without limits by following a simple tenet for tire design: make 'em high-volume and kick-ass. The ExtraTerrestrial tire was meant to serve as a heavy-duty off road touring tire that shines on hard pack surfaces. It uses a nylon breaker in the sidewalls for cut protection, a molded pattern for anti-cut propagation, and a Kevlar cap under the tread to protect against flats. The ET tire uses a distinctly directional tread pattern and its width yields more traction than you might expect from a tire with such little rolling resistance. The tread is low profile with a file tread in between blocks. The ExtraTerrestrial tire has enough width and traction for the soft stuff and won't bog you down on smooth or hard surfaces. It's made to be durable and versatile and is at home on tour or on the trail. - Bead Seat Diameter: 559mm - Casing: 60tpi, tubeless-ready bead (928g)

The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don’t want to sacrifice traction, look no further. With sizes ranging from a svelte 41mm all the way up to a hefty 4.8”, there’s a Knard to solve all your fast-rolling needs. - Folding bead - Casing: 60 TPI - Max pressure: 75psi - Weight: 510g

Lou is the 26 x 4.8" rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl, and claw its way over rooty, rocky, wet, muddy, loose, or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled, 120tpi which conforms well to the ground surface shape. - Folding Kevlar bead - Tubeless Ready

We named this tire for our friend Nate, who is also quite large and aggressive. This tire has a shred-your-face-off, run-over-anything, kung fu grip knobby tread pattern. The casing is round and supple. Tall, widely-spaced knobs are siped for added grip and compliance. The knobs’ wide spacing means they dig deep and still shed the crap you’re riding through. The tread wraps a little around the sides of the tire, providing good knob contour even on very wide rims, which in turn allows good off-camber traction. Similar to our beer preferences, Nate is available in black and tan. - Folding bead - Max pressure: 30psi

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

A properly set up tubeless fatbike tire is like the holy grail of suppleness and, until now, we've forced you all to piecemeal together a tubeless kit for your Other Brother Darryl rims (Sorry about that. It won’t happen again, we promise… probably). But now you don’t have to do that anymore because our Tubeless Kit has everything you need to ditch your fat tubes. It comes with two of our nylon rim strips, a roll of Whisky Parts Co. tubeless tape, two tubeless valves, and two Problem Solvers Super P-Nuts. Just add your favorite sealant and let ‘er rip.

Sunlite's Cruiser 80 are balloon-like tires with grooved tread, large air volume for shock absorption. - Bead: Wire

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 20 x 2.125

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

• Balloon tire with grooved tread • Large air volume for added shock absorption • Wire bead • Size: 26 x 2.125

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: Schwinn cruiser-style 26 x 1 3/4 (571mm diameter)

- Cruiser tire with large air volume for shock absorption - Wire bead

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Urban/recreational tire with shallow, grooved tread for multiple conditions - Size: 26 x 1 3/8 - ISO 590

- Recreational tire with horizontal grooves for traction - Size: 26 x 1 3/8 - ISO 597

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

- Urban tire with raised center for reduced rolling resistance - Size: 16 x 1 3/4 - ISO 317

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 20 x 1-3/4 S-7 - ISO: 419 - Bead: Wire - PSI: 50 - Weight: 470g * not interchangeable with tires labeled "20 x 1.75"

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

Sunlite Utili-T Thorn resistant tubes feature a 3.7mm tread side for increased puncture protection. - Valve Type: Schrader - Flat Fold Width: 56mm - Wall Thickness: 3.7mm/1.7mm - Removable valve core

Recreational tire with raised center for low rolling resistance. - ISO: 630 - Bead: Wire - PSI: 70

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Our Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a five-gallon container that's ideal for in-home or shop use. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle.

The All Condition Armadillo Elite is the most flat-resistant tire available. Impressively though, it has performance characteristics that far exceed many competitor's race tires. We've given it a tread pattern that offers excellent all-weather traction, and newly-sourced materials for the best puncture protection possible. In terms of ride quality, our GRIPTON compound is surpassed by none. It provides low rolling resistance and the ultimate in dry and wet condition traction. Without hyperbole, it's the best flat-resistant, high-performance tire that we've ever made. - Casing: 120 TPI - Bead: Foldable - Compound: GRIPTON - Flat Protection: Armadillo Elite - 700 x 23mm, PSI 110-125, approximate weight 285g - 700 x 25mm, PSI 110-125, approximate weight 315g - 700 x 28mm, PSI 85-95, approximate weight 350g - 700 x 30mm, PSI 85-95, approximate weight 400g - 700 x 32mm, PSI 85-95, approximate weight 430g

The Butcher GRID TRAIL 2Bliss Ready T7 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the T7 GRIPTON compound enhances rolling speed while still providing tons of grip. - Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 650Bx2.3", psi 25-50, approximate weight 1050g - 650Bx2.6", psi 20-40, approximate weight 1200g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60 TPI, Dual-Ply - Compound: GRIPTON T9

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40 approximate weight 1350g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T9.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside. The center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. - Casing: Additional bead to bead protection for exceptional durability plus sidewall stiffness stability - Compound: GRIPTON - Pressure: 25 – 50psi - Folding bead - 2Bliss Ready

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

Multi-Terrain tire designed for the GLOBE cargo bike family. The tire is great for around town, daily commuting, weekend travels, and wherever exploration takes you. Smooth center tread rolls silently while tall and strong shoulder knobs provide confidence if your route takes you off road. The casing is designed to carry high loads and has extra protection to prevent flats. - Bead: Wire - Flat Protection: Flak Jacket - 20 x 3.5, psi 15-35, approximate weight 1200g - Globe Haul replacement tube, 20 x 3.5-4.5 Schraeder Valve, SKU 03123-1000

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Presta Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Schrader Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 650Bx2.3", psi 25-50, approximate weight 1050g - 650Bx2.6", psi 20-40, approximate weight 1100g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60 TPI, Dual-Ply - Compound: GRIPTON T7/T9

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 27.5 x 2.6" - PSI range: 20-40 - Approximate weight: 850g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Fast Trak GRID 2Bliss Ready T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.2", PSI 25-50, approximate weight 730g - 29 x 2.35", PSI 25-50, approximate weight 800g

The Fast Trak Sport has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. - Casing: 60 TPI - Bead: Wire - 26 x 2.20", PSI 25-50, approximate weight 710g

The Ground Control tire is such a great trail tire, we have adapted it for all sizes and ages. This tried-and-true design features CAD-engineered knob shapes, which strengthen the knob structure for optimal braking and traction, but it keeps the knob surfaces adaptable for the best possible grip on mountain trails. - Casing: 26 TPI - Bead: Wire - Compound: 60a - 20x2.35", 25~50 - 24x2.35", 25~50

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 27.5 x 2.35", PSI 25-50, approximate weight 720g

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 800g - 29 x 2.35", PSI 25-50, approximate weight 845g

Specialized's Ground Control GRID is an exceptionally versatile trail tire. CAD engineered knob shapes strengthen knob structure for optimum braking and traction, but keep knob surfaces adaptable for best ground control. The GRIPTON compound helps make this the perfect choice for epic trail rides in any condition. Specialized recommends GRID tires for anyone seeking the utmost in flat and sidewall protection. - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 29 x 2.1" psi 25-50; approximate weight 710g - 29 x 2.3" psi 25-50; approximate weight 810g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 27.5 x 2.35", PSI 25-50, approximate weight 800g - 27.5 x 2.6", PSI 25-50, approximate weight 850g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire.

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire - 26 x 2.35", PSI 25-50, approximate weight 730g

Specialized's Hardrock'R is a long-lasting tire with an aggressive, yet smooth-rolling tread with multi-directional knobs that are sure to improve traction and cornering over mixed terrain. And with the added benefit of its Flak Jacket flat protection, you'll be sure to hit it all with confidence and control. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 26 x 2.0"; psi 35-65; approximate weight 880g - 650b x 2.0"; psi 35-65; approximate weight 960g - 29 x 2.0"; psi 35-65; approximate weight 1000g