With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)
Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The Go Big On-Center Mount by K-Edge is the next generation in industry-leading light/camera mounts. The new mount provides easier installation with a stronger, more secure platform for your Lumina Series headlight or action camera. On-Center gives you a clean, centered position for your Lumina Series light, and a better-framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. Compatibility All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately), GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras, Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Includes: Go Big On-Center Mount and mounting hardware - Fits 31.8mm bars - CNC Machined 6061 T6 Aluminum - Stable and secure accessory mount - On-center view for Lumina Series lighting systems or other compatible devices - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Dimensions: 11 x 20 x 4cm - Weight: 45.7g - Made in Boise, Idaho, USA - Note: Assembly bolts not meant to be removed or tampered with at any time
The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY The Lumina 1000 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems
The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator, and easy USB rechargeability, it's the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Swift Features - Lumen Output: 500 - 5 Modes with Run Times: 1:40 – 32:00hrs - Charge Time: 1:45 / 3:00hrs - Weight: 82g - Battery: Li-Po - Low Battery Indicator - 500 lumen super compact and bright taillight - Water / Dust Resistant IP64 Rated Swift Run Times - Low—10:00h at 150 Lumens - Med—3:40h at 250 Lumens - High—1:40h at 500 Lumens - Flash—12:30h at 500 Lumens - Walk—32:00h at 30 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 1:30 – 10:30hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
Lezyne's Micro Drive 500XL is a multi-purpose performance LED cycling light featuing compact, durable, and heat-dissipating CNC machined aluminum construction. Ultra-high-output LEDs and imporved optics deliver up to 500 lumens. Optional Overdrive Race Mode toggles between Overdrive and Economy modes only. Mode Memory function returns to selected mode after turning off. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Integrated cable-free recharging USB stick. Versatile handlebar strap secures to round and aero bars. Advanced Li-Poly battery for superior run time.
The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
What’s loved by some, might not be so loved by others. So instead of compromising, we at knog have made 10x designs for three lights. Some are mild. Some are wild! But the striking form does not outshine the excellent function. Super bright, AA battery-powered, long runtimes, replaceable straps, and side illumination. So whoever you are, find your POP! FEATURE -RUN TIME : 7 hrs (steady), 200 hrs (eco flash). -LEDs : 1x Super-bright SMT LED -SIDE ILLUMINATION : ?Giving riders 180° visibility -BUTTON : Longer button push on (0.75sec) prevents accidental activation of light. Short presses switch modes continuously. -ATTACHMENT : Tool-less attachment for seat posts and frames of 22-32mm diameter.
Unleashing a powerful 950 lumens right through the darkness, the Metro Pro™ 950 pierces the night with exceptional brightness and clarity. Its cycling tuned optics enables an extra-wide, long rage output to maximize your line of sight. Not only limited to night, the Metro Pro’s DayLightning® mode makes you stand out in broad daylight to give you the advantage anytime and anywhere you ride. Patent pending. - Powerful 950 lumen output with 9 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - Triple Flash - Zoom - DayLightning® - Walking mode) - SteadyPulse® mode alerts nighttime motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - Micro USB rechargeable, internal battery lasts up to 100 hours - Low battery indicator alerts you when a charge is needed - Rugged, water-resistant design - Side illumination ports highlight your presence to nearby motorists - Light activation lockout prevents accidental light activation - Locktite™ quick-release handlebar mount keeps the light securely fastened to the handlebar RUN TIMES: - Boost: 1:15 hrs - High: 1:45 hrs - Medium: 3:00 hrs - Low: 10 hrs - SteadyPulse®: 4:00 hrs - DayLightning®: 14 hrs - Triple Flash: 22 hrs - Zoom: 4:00 hrs - Walking: 100 hrs - CHARGE TIME: 2:30 hrs (depending on charger used) - MOUNTING: Handlebar - BATTERY: Built-in Li-ion Patent pending. *Features and specs are subject to change without notice.
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Blackburn's minimalist Click light sets are incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar, seatpost, or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20-lumen front - 4-lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Charge, Click, Go Click Power Free yourself from the hassle of batteries! This small but essential accessory makes you visible to traffic. Bright side beams throw off additional light, and the silicone mount fits almost any handlebar. A Micro-USB cable makes it easy—just charge, click and go! - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time
Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time
Looking for a light set that is simple, affordable, and bright? The Blackburn DAYBLAZER 400 and Click USB combo is just the ticket. The DAYBLAZER 400 features the BLITZ daytime running mode, versatile mounting options, and excellent side visibility, while the Click rear light packs 20-lumens of light in a tiny, easy-to-use package. DAYBLAZER 400 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g CLICK USB Rear Light - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time - Lumens: High 20, Flash 20 - Runtime: High 1.5hrs, Flash 3hrs - Weight: 22g/0.05
Page 1 of 2 Next page