Tires/Tubes

Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width. - Folding bead

When you're out on a ride the last thing you want is to be limited by your tires in any way. Surly's ExtraTerrestrial tires were designed to let you ride without limits by following a simple tenet for tire design: make 'em high-volume and kick-ass. The ExtraTerrestrial tire was meant to serve as a heavy-duty off road touring tire that shines on hard pack surfaces. It uses a nylon breaker in the sidewalls for cut protection, a molded pattern for anti-cut propagation, and a Kevlar cap under the tread to protect against flats. The ET tire uses a distinctly directional tread pattern and its width yields more traction than you might expect from a tire with such little rolling resistance. The tread is low profile with a file tread in between blocks. The ExtraTerrestrial tire has enough width and traction for the soft stuff and won't bog you down on smooth or hard surfaces. It's made to be durable and versatile and is at home on tour or on the trail. - Bead Seat Diameter: 559mm - Casing: 60tpi, tubeless-ready bead (928g)

The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don’t want to sacrifice traction, look no further. With sizes ranging from a svelte 41mm all the way up to a hefty 4.8”, there’s a Knard to solve all your fast-rolling needs. - Folding bead - Casing: 60 TPI - Max pressure: 75psi - Weight: 510g

Lou is the 26 x 4.8" rear-specific mate to Bud. Lou’s tread is much like Bud’s with tall knobs designed to grind, crawl, and claw its way over rooty, rocky, wet, muddy, loose, or otherwise inhospitable terrain. Lou’s tread pattern is a bit different, however, made for stability while both braking and accelerating. Its casing is durable, thin-walled, 120tpi which conforms well to the ground surface shape. - Folding Kevlar bead - Tubeless Ready

We named this tire for our friend Nate, who is also quite large and aggressive. This tire has a shred-your-face-off, run-over-anything, kung fu grip knobby tread pattern. The casing is round and supple. Tall, widely-spaced knobs are siped for added grip and compliance. The knobs’ wide spacing means they dig deep and still shed the crap you’re riding through. The tread wraps a little around the sides of the tire, providing good knob contour even on very wide rims, which in turn allows good off-camber traction. Similar to our beer preferences, Nate is available in black and tan. - Folding bead - Max pressure: 30psi

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

A properly set up tubeless fatbike tire is like the holy grail of suppleness and, until now, we've forced you all to piecemeal together a tubeless kit for your Other Brother Darryl rims (Sorry about that. It won’t happen again, we promise… probably). But now you don’t have to do that anymore because our Tubeless Kit has everything you need to ditch your fat tubes. It comes with two of our nylon rim strips, a roll of Whisky Parts Co. tubeless tape, two tubeless valves, and two Problem Solvers Super P-Nuts. Just add your favorite sealant and let ‘er rip.

Sunlite's Cruiser 80 are balloon-like tires with grooved tread, large air volume for shock absorption. - Bead: Wire

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 20 x 2.125

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

• Balloon tire with grooved tread • Large air volume for added shock absorption • Wire bead • Size: 26 x 2.125

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: Schwinn cruiser-style 26 x 1 3/4 (571mm diameter)

- Cruiser tire with large air volume for shock absorption - Wire bead

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Urban/recreational tire with shallow, grooved tread for multiple conditions - Size: 26 x 1 3/8 - ISO 590

- Recreational tire with horizontal grooves for traction - Size: 26 x 1 3/8 - ISO 597

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

- Urban tire with raised center for reduced rolling resistance - Size: 16 x 1 3/4 - ISO 317

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 20 x 1-3/4 S-7 - ISO: 419 - Bead: Wire - PSI: 50 - Weight: 470g * not interchangeable with tires labeled "20 x 1.75"

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 4.3mm - Thorn-resistant

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

Sunlite Utili-T Thorn resistant tubes feature a 3.7mm tread side for increased puncture protection. - Valve Type: Schrader - Flat Fold Width: 56mm - Wall Thickness: 3.7mm/1.7mm - Removable valve core